
Your configuration
Updates with your selection in “Configure & add to quote”
Commercial
CL DL 12
In stockThe downlight that installs without a can
Recessed downlight with an integrated junction box: wire it straight to
Certifications
Does your project require another standard? We build to your specification.
Photometric data (IES/LDT) and datasheet available on request: we send them in under 24 h. Or write to us by email →
Design your space with the photometric studyBetaCheck that your project meets the norm: free, in minutes.Your configuration
Updates with your selection in “Configure & add to quote”
Configure & add to quote
Power
Light color
We manufacture any colour temperature. If the one your project needs isn't listed, ask for it and we'll build it.
Mounting
Other / extra requirement
Quantity
- No housing can: less material, less installation time, less space above the ceiling
- Adapts on site: three wattages and three color temperatures without replacing the fixture
- One engine covers four diameters; the trim is chosen last
- Twist-lock coupling: changing the finish does not touch the installation
- Up to 103 lm/W and 6,100 lumens
- ENERGY STAR, UL and cUL
- Seven trim finishes, including a wall washer
- IC version for insulated ceilings, and wet location on request
Specifications
Electrical specifications
- Input voltage
- 120 – 347 V AC (20 W and 40 W engines) · 120 – 277 V AC (60 W engine)
- Wattage
- Three selectable steps per engine (see table)
- Dimming
- 0-10 V down to 10 % (20 W and 40 W) · down to 1 % (60 W)
- Tested dimmers
- Lutron® Diva-Dvtv · Leviton® IP-710-DL
- Connection
- Integrated junction box: wires straight to the switch, no can or lamp holder
- Emergency
- Optional: 16 W or 25 W emergency driver with indicator, installed on site. A prewired version is available
Photometric specifications
- Output
- 1,700 · 3,400 · 6,100 lm depending on engine
- Efficacy
- 85–103 lm/W
- CCT
- 3000–5000 K
- Optics
- Reflector with a haze finish to reduce the brightness of the emission point
- Distribution
- Symmetric as standard, and wall washer in the asymmetric trims
Physical, materials & mounting
- Diameters
- 4" · 6" · 8" · 10": 8" and 10" in round trim only
- Trim shapes
- Round and square, in standard and wall-washer versions
- Engine (dimensions)
- 20 W: 3.46" × 4.14" · 40 W: 4.96" × 4.14" · 60 W: 5.37" × 5.36" × 4.14"
- Coupling
- Twist-lock: the engine goes in and locks with a twist, no tools needed
- Ceiling fastening
- Adjustable butterfly clips that adapt to the ceiling thickness
- Installation
- Mounts directly on the ceiling. Needs no recessed can, bulb or additional labor
- New construction frame
- Optional: round (3"–8") or square (4"–6") frame, with or without a junction box included
Protection & lifetime
- Location
- Damp location as standard · wet location available as a special version in 4", 6" and 8" round, for the 20 W and 40 W engines
- Thermal rating
- 20 W engine in IC (insulation contact) and non-IC versions · 40 W and 60 W engines in non-IC
Configurations / SKUs
| SKU | Selectable wattages | Output | Efficacy | Adjustable CCT | Trim diameters |
|---|---|---|---|---|---|
| CL-DL12-20W-3CCT★ | 10–20 W | 1,700 lm | 85 lm/W | 3000–4000 K | 4" · 6" · 8" · 10" |
| CL-DL12-20W-3CCTA | 10–20 W | 1,700 lm | 85 lm/W | 3000–5000 K | 4" · 6" · 8" · 10" |
| CL-DL12-40W-3CCT★ | 27–40 W | 3,400 lm | 85 lm/W | 3000–4000 K | 4" · 6" · 8" · 10" |
| CL-DL12-60W-3CCT | 40–60 W | 6,100 lm | 103 lm/W | 3000–4000 K | 6" · 8" · 10" |
Swipe the table to see all columns →
Similar products
Same family
Complete your project
Often specified together



